In order to ensure the personal safety of the staff and the service life of the equipment, strict safety operation regulations are essential. The following are the methods for correctly operating the equipment:
1. Pay attention to whether the limit of each process is normal and whether the screws are loose at any time, find the situation in time, stop the machine for adjustment in time and eliminate hidden dangers;
2. Keep the hydraulic system, oil pipeline and hydraulic station of cement brick machine clean;
3. Before starting the cement brick machine every time, check the clutch, brake, steel wire rope and other accessories of the cement brick machine to ensure their integrity, and there shall be no foreign matter in the drum;

4. In case of oil leakage of hydraulic parts such as oil cylinder, valve parts, valve block and oil pipe, replace the oil seal, sealing ring and other maintenance methods or replace the whole part to avoid operation with disease. The oil pump and oil motor should often listen, see and touch during operation. If any abnormality is found, they must be shut down and discharged;

5. During the use of the mixer, it must be placed in a firm place and supported stably with a support or foot cylinder, and it is not allowed to use tires for support;
6. The vibration time of products shall be strictly controlled. Adjust the vibration time according to the requirements of products, summarize the best ratio between yield and quality, and adjust the feeding amount or feeding times to achieve balance if necessary;
7. When the feed hopper is lifted, no one is allowed to pass or stay under the hopper. Fix the hopper after work;

8. Pay attention to whether the limit of each process is normal and whether the screws are loose at any time. If any accident is found in time, stop the machine for adjustment in time to eliminate hidden dangers.